|Single Stage with Sensor
Range: -30F to +220F
Differential: 1F to 30F
Power: 120 or 208/240 VAC
Output: SPDT Relay
An electronic temperature control for commercial HVAC/R at a surprisingly affordable price.
The RANCO ETC is a microprocessor-based family of temperature controls designed to provide on/off control for commercial heating, cooling, air conditioning and refrigeration applications. With its wide temperature range, one and two stage capability, selectable heating/cooling modes and multi-voltage input, the ETC is one of the most versatile temperature controls available.DIGITAL DISPLAYUnlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1F resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display.CHOICE OF ONE OR TWO STAGE MODELSThe ETC line includes both one and two stage models. On two stage controls, each stage can be set independently thus eliminating the bothersome task of calculating interstage temperatures. And two state models can be set up with overlapping heating or cooling stages.REMOTE TEMPERATURE SENSINGInclude remote sensor comes with 10 foot cord. The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire.BUILT-IN SAFETYEvery ETC model is equipped with diagnostic programs that check for hardware, software or system problems and display different error codes to indicate where the trouble is.The ETC also has a keypad lockout switch to prevent tampering with the control setting by unauthorized personnel The switch, which is located inside the enclosure, can be used to disable the keypad function.MAXIMUM APPLICATION FLEXIBILITYWide temperature range (-30F to 220F) and differential adjustment (1F to 30F)
Available in one and two stage models.
Accepts 120/208/240 volt input.
User selectable heating/cooling modes for use in hundreds of applications.
Replaces most electromechanical and electronic temperature controls.SAFETY FEATURESKeypad lockout switch prevents tampering.
EEPROM memory retains control settings during power outage.
On power up, time delay protects equipment from simultaneous restarts.
24 volt input models
- Electronic Temperature Controls
- Replace most electromechanical and electronic temperature controls.
- Self-diagnostic program with error codes. Keypad lockout, settings memory and time delay on power up. Thermistor sensor is 1/4" dia. x 2"L with 8-ft. cable. 0 to 10V output on Nos. 3ZP78, 3ZP80, 3ZP83, and 3ZP85. All are UL Listed and CSA Certified.
|Item || ||Line Voltage Thermostat|
|Type || ||Electronic Temperature Control|
|Switch Type || ||SPDT|
|Switch Action || ||Open / Close on rise|
|Number of Switches || ||1|
|Control Range (F) || ||-30 to 220|
|Differential (Deg. F) || ||1 to 30|
|Height (In.) || ||6 1/2|
|Width (In.) || ||2 3/4|
|Depth (In.) || ||2 1/2|
|Temp. Sensitivity (Deg. F) || ||+ - 1|
|Sensor Type || ||Thermistor|
|Sensing Bulb Dia. (In.) || ||1/4|
|Sensing Bulb Length (In.) || ||2|
|Capillary Length (In.) || ||96|
|Characteristics || ||Hardware, Software or System Problems and Displays Different Error Codes for Easy Troubleshooting, EPROM Memory Retains Control Settings During Power Outage, Replaces Most Electromechanical and Electronic Temperature Controls|
|For Use With || ||Heating, Cooling, Refrigeration|
|Color || ||Gray|
|Application || ||For Selectable Heating/Cooling Modes for Use in Hundreds of Commercial HVAC/R Applications, Keypad Lockout Switch Prevents Tampering|
|Display || ||LCD|
|Enclosure Type || ||NEMA 1|
|Voltage Range || ||120 to 240 VAC|
|Full Load Amps @ 120V || ||16A (NO), 5.8A (NC)|
|Full Load Amps @ 240VAC || ||8A (NO), 2.9A (NC)|
|Pilot Duty Contacts (VA) || ||125|
|Mounting || ||Vertical or Horizontal|
|Number of Relay Inputs || ||1|
|Number of Relay Outputs || ||1|
|Number of Stages || ||1|
|0-10V Output || ||No|