| Controls include manual valve, two automatic operators, servo pressure regulator and pilot adjustment. |
Provide two automatic valves.
Solenoid-operated first automatic valve opens on thermostat call for heat; closes when call for heat ends.
Diaphragm-operated second automatic valve opens under control of regulator; closes if gas or power supply is interrupted.
Meet codes requiring dual safety shutoff.
Natural to LP and LP to Natural conversion kits available for standard and slow opening gas valves.
LITE-RITE (OFF-PILOT-ON) lighting sequence.
All adjustments, wiring connections and pilot outlet are accessible from top of control.
Adjustable servo regulator effectively maintains almost constant gas output pressure under wide fluctuations in gas supply pressure.
Compatible with ECO connector.
|Description||24 Vac Dual Standing Pilot Gas Valve with 1/2 in. x 1/2 in. inlet\outlet, standard opening and 3.5 in. wc pressure regulator setting|
|Ignition Type||Standing Pilot|
|Inlet/Outlet Size (in.)||1/2 in. x 1/2 in.|
|Opening Characteristics (standard, step)||Standard|
|Capacity @ 1 in. p.d.||130,000 BTU/hr; 20,000 BTU/hr minimum|
|Pressure Ratings (psi)||1/2 psi|
|Pressure Ratings (kPa)||3.5 kPa|
|Pressure Regulator Setting (psi)||3.5 in. wc|
|Pressure Regulator Setting (kPa)||0.87 kPa|
|Pilot Gas Outlet||Compression fitting for 1/4 in. OD tubing|
|Pressure Tapping||1/8 in. NPT with plug|
|Electrical Connections||Combination screw and 1/4 in. male quick connects.|
|Temperature Range (F)||0 F to 175 F|
|Temperature Range (C)||-18 C to +79 C|
|Mounting||0 to 90 degrees in any direction from the upright position of the gas control knob, including vertically.|
|Dimensions (in.)||5 3/16 in high x 4 1/8 in. wide x 3 1/4 in. deep|
|Dimensions (mm)||132 mm high x 104 mm wide x 83 mm deep|
|Includes||Natural to LP Conversion Kit|
|Includes||One 1/2" x 3/8" reducer bushing|
|Includes||One 3/4" straight flange|
|Approvals, American Gas Association IAS||AGA Design Certificate: L2025006|
|Approvals, Canadian Gas Association||CGA Design Certificate: L2025006|
|Approvals, Underwriters Laboratories Inc||UL Component Recognized: MH5323|
|Approvals, Australian Gas Association||Australian Gas Assoc. Design Certificate: 4214; Approved for Delta C Applications|